Basic Features
Dialog Cladty (Off / On)..............................................................................................................................SPDIF Output
(standard sound mode only)
Dialog Clarity emphasizes voice while maintaining the
background sound level.
Preferred Language ..................................................................................................................................................
(digital channels only)
DigitaI-TV broadcasts are capable of
simultaneous transmission of many
audio tracks (for example, simultaneous
translations of the program into foreign
languages),
You can only select a language among
the ones being broadcasted.
SPDIF (Sony Philips Digital Interface)is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Ill Audio Format : During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF)format from the options PCM or Dolby Digital.
By connecting to 5,1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
xperience.
Ill Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms- 250ms),
Multi-Track Sound (MTS)
(analog channels only)
Ill Mono: Choose for channels that are
broadcasting in mono or if you are
having difficulty receiving a stereo signal.
Ill Stereo: Choose for channels that are
broadcasting in stereo.
Ill SAP: Choose to listen to the Separate
Audio Program, which is usually a foreign-language
translation.
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAR
Auto Volume (Off/Normal/Night)
To equalize the volume level on each channel, set to Normal.
Ill Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise, it is useful at night.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver.
Inthis case, set the TVto External Speaker.
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
When Speaker Select is set to External Speaker, you
should use these settings.
* TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker, you
should use these settings.
* TV Speaker: On, External Speaker: On
Ifthere is no video signal, both speakers will be mute.
Sound Reset
Reset all sound settings to the factory defaults.
Setting the Time
[_ MENurm -_Setup-_Time-_ ENTERE_
Time
The current time will appear every time you press the
_NFO button.
Ill Clock: Setting the clock is for using various timer
features of the TV.
Ifyou disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically,
- Auto: Set the current time automatically using the
time from the digital channel,
The antenna must be connected in order to set
the time automatically,
- Manual: Set the current time manually,
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually,
Clock Set: Set the Month, Day, Year, Hour, Minute
and am/pm,
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
8 English
To Next Page
Loading...
Need help?
General