64
Menu functions
Send read receipt
: determine whether or not the
phone sends a read-reply for incoming e-mails. If
you select
Reply reminder
, the phone asks you to
send a read-reply.
Download limit
: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Download method
: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Keep in server
: leave copies of e-mails on the e-
mail server after retrieving.
•
Block list
: specify e-mail addresses or subjects
you want to reject.
•
Email accounts
: set up an e-mail account and
select an account to be used.
Current account
: check or select an account.
Account settings
: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
-
Account name
: enter a name for the currently
selected account.
-
User name
: enter a user name.
-
Email address
: enter your e-mail address.
-
SMTP server
: enter the IP address or host name
of the outgoing e-mail server.
-
SMTP port
: enter the SMTP port number.
-
Connect to POP3
(
IMAP4
)
server first
:
connect to the POP3 or IMAP4 server before
connecting to the SMTP server to send e-mails.
-
Protocol type
: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is
POP3
:
-
POP3 server
:
enter the IP address or host name
of the server that receives your e-mail.
-
POP3 port
: enter the POP3 port number.
-
User ID
: enter the POP3 user name.
-
Password
: enter the POP3 password.
-
Use SMTP authentication
: enable SMTP
authentication, which requires the user to login
before sending e-mails.
To Next Page
Loading...
