Samsung SGH-E870 - Page 96

94
Menu functions
Creating a profile
1. Press < New >. If a profile has already been saved,
press < Options > and select Add new
connection .
2. Specify profile parameters:
• Profile name : enter a profile name.
• Homepage URL : enter the URL address of the
page to be used as your homepage.
• Proxy : activate or deactivate the proxy server.
• IP address : enter the IP address of the proxy
server.
• Port : enter the port number of the proxy
server.
• Linger time : set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
• DNS : activate or deactivate the DNS (Domain
Name Server) addresses.
• DNS 1 and DNS 2 : enter the primary and
secondary DNS addresses.
• Bearer : select the network bearer type.
• Advanced settings : change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS :
APN : enter the access point name.
Login ID : enter the login ID.
Password : enter the login password.
When the bearer is set to GSM :
Dial number : enter the PPP phone number.
Login ID : enter the login ID.
Password : enter the login password.
Data call type : select a call type for data
transmission.
3. Press < Save > to save the profile.
Using profile options
Press < Options > to access the following options:
• Edit : edit the selected profile.
• Delete : delete the profile.
• Add new connection : add a new profile.