Samsung Electronics8
3. Disassembly and Reassembly
3-1 Indoor Unit
Stop operation of the air conditioner and remove the power cord before repairing the unit.
No Parts Procedure Remark
1 Front Panel
1) Stop the air conditioner operation and
block the main power.
2) Detach tape of the Front Panel upper.
3) Open the upper Front Grille by pulling
right and left sides of the Grille.
4) Slide the lower Front Grille down, then
disassemble it by pulling it forwards.
5) Take the left and right Filter out.
6) Loosen one of the right screw and
separate the Terminal Cover.
7) Detach the thermistor from the Front Grille.
8) Loosen 5 fixing screws of Front Grille.
9) At first, press the left and center hook of
the back side of the Panel Grille with the
thumb to remove the hook. And press the
right of the upper side of the Panel Grille
with the fingers. And then disassemble the
Panel Grille.
10
) Pull the lower left and right of discharge
softly for the outside cover to be pulled
out.
DB98_15920A(2)_1 04/3/9 11:24 AM Page 8
To Next Page
Loading...
