Samsung SH09BPH - Page 21

20 Samsung Electronics
6-3 Sequence of trouble shooting for inverter aircon
OPERATION START
• The indoor unit does not work even
though the power is plugged.
• There is no sound "DING"
• The lamp is not on the display.
The indoor unit does not work when
operated by the remocon.
The 2 digit part of indoor LED
display shows Error Code and the
unit stops several minutes after the
indoor uint starts.
In case of Error Code : Er/E1(D), Er/E5(D), Er/05(D), Er/06(A), E3/01(E)
In case of Error Code : Er/09
In case of Error Code : E3/01 → (F)
In case of Error Code : E3/E6(H), Er/17(K),
In case of Error Code : Er/31(H), Er/32(G), Er/33(G), Er/36(K),
In case of Error Code : Er/37(I), Er/38(K)
In case of Error Code : Er/11(J), Er/12(M), Er/13(M), Er/14(L),
In case of Error Code : Er/15(N), Er/18(O)
Check the indoor unit control board. (A)
Checking the Remocon.(B)
Check the control board and display board
of indoor unit.(C)
Check the error code on the LED
display(A), (D)-(O)
Check the indoor unit
See section 5. Setup the
model option
Check the communication line
Check the outdoor unit
Check the outdoor unit and
outdoor unit installation
DB98_17175A_1 2/6/04 4:14 PM Page 21