Selecting Energy Saving Mode
You can save energy even during operation in the Cool and Heat
mode. In the Cool mode, the temperature will rise and in the Heat
mode, the temperature will fall, resulting in saving energy.
2 Press the button.
Result
: ◆
The indoor unit beeps.
◆
The air conditioner runs in the Energy Saving mode.
◆
The outer air flow blade moves up and down.
◆
To stop the Energy Saving mode, press the again.
NN
NN
oo
oo
tt
tt
ee
ee You can select the Energy Saving mode in the Cool and
Heat mode.
3 To adjust the temperature, press the button one or more times
until the required temperature is displayed.
5 To control the direction of the air flow, refer to pages 16 and 17.
4 To select the fan speed, press the button one or more times until
the required setting is displayed.
E-15
ENGLISH
1
If necessary, press the button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
IMPORTANT
To Next Page
Loading...
