Samsung SH09BWHA - Operating Your Air Conditioner Without the Remote Control

Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
If
the air conditioner is used at... Then...
High temperatures The automatic protection feature may be triggered and the air conditioner stopped.
Mod
e Outdoor Temperature Indoor Temperature Indoor Humidity
Heatin
g 0°C to 24°C approx. 27°C or less -
Coolin
g 19°C to 43°C approx. 16°C to 32°C approx. 80% or less
Dryin
g 19°C to 43°C approx. 16°C to 32°C approx. -
 If the outdoor temperature is as low as 0°C, the heating capacity drops up to 70~80% depending on the
operating
condition.
If
the cooling operation is used at over 32°C(indoor temperature), it does not cool at its full capacity.
Low temperatures A water leak or some other malfunction may occur if the heat exchanger freezes.
High humidity levels Water may condense on and drip from the surface of the indoor unit if it is used for long periods.
E-23
HS
ILG
NE
Operating Your Air Conditioner Without the Remote Control
Your air conditioner can be operated directly from the indoor unit if
the
remote control is lost or broken.
1 To switch the air conditioner on, press the ON/OFF switch on the right
side
of the indoor unit.
Result
:  The Operation indicator on the indoor unit comes on.
 The indoor unit beeps.
 The air conditioner starts up in the most suitable mode for
the
room temperature. The mode may change from cooling
into
heating, from heating into cooling depending on the current
temperature
during operation:
Room
Temperature Operating Mode
Less
than 24°C Heat
24°C
or above Cool
2 To switch the air conditioner off, press the On/Off switch again.
NN
NN
oo
oo
tt
tt
ee
ee Even if the air conditioner has been switched on via the
On/O
ff switch, operations can still be controlled using the
remote
control as usual.