SAMSUNG | 95
1
TROUBLESHOOTING
8
Set up the model Option
8-5. Set up the Model Option
Step 1 : Preparing the remocon to main PBA option set
1
st
Remove the battery from the remocon.
2
nd
Press the temperature raise/down button simultaneously and insert the battery again.
3
rd
Make sure the remocon display shown as .
Step 2 : Second stage preparation of the remocon option set.
ex) Option No. : 066025-172362
❈ Note ; In case the wrong letter has been selected, continue to press the button until the correct letter appears.
1
st
If the first stage number “ ” appears on the display, proceed to the second stage.
2
nd
Every time the ! and & button, “ ” and “ ” each continue to appear.
3
rd
Whenever pressing the @, #, $, %, ^, *, (, ), 1, 2 button, the number increases from
0~9(0123456789) and A, b, C, d, E, F each time.
!
If the first number is , it is correct otherwise press until
appear.
@
When pressing the button ~ appear on the display,
select one of them.
#
When pressing the button ~ appear on the display,
select one of them.
$
When pressing the button ~ appear on the display,
select one of them.
%
When pressing the button ~ appear on the display,
select one of them.
^
When pressing the button ~ appear on the display,
select one of them.
DB98_08187A(1)_57~100 3/27/03 2:24 PM Page 95
To Next Page
Loading...
