Basics
25
1
Insert the ejection pin into the hole on the tray to loosen the tray.
Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device may
be damaged.
2
Pull out the tray gently from the tray slot.
For dual SIM models, when you remove the tray from the device, the mobile data
connection will be disabled.
3
Place a memory card on the tray 2 with the gold-coloured contacts facing downwards.
Tray 2
Tray 1
4
Gently press the memory card into the tray to secure it.
If the card is not fixed firmly into the tray, the memory card may leave or fall out of the
tray.
5
Insert the tray back into the tray slot.
•
If you insert the tray into your device while the tray is wet, your device may be
damaged. Always make sure the tray is dry.
•
Fully insert the tray into the tray slot to prevent liquid from entering your device.
To Next Page
Loading...
Need help?
General
