Connecting with other devices
150
Sending data
Allow data exchange when your device’s NFC antenna touches the other device’s NFC
antenna.
1
On the All apps screen, tap
Settings
→
NFC and sharing
→
NFC
, and then tap the
NFC
switch to activate it.
Alternatively, open the quick settings panel and tap
NFC
to activate it.
2
Tap
Android Beam
or
S Beam
and tap the
Android Beam
or the
S Beam
switch to
activate it.
•
Android Beam
: Send data via Bluetooth.
•
S Beam
: Send data via Wi-Fi Direct. This feature is optimal for large data transfers.
3
Select an item and touch the other device’s NFC antenna to your device’s NFC antenna.
4
When
Touch to beam.
appears on the screen, tap your device’s screen to send the item.
•
Do not send copyright-protected data via S Beam. Doing so may violate copyright
laws. Samsung is not responsible for any liabilities caused by the illegal use of
copyrighted data.
•
If both devices try to send data simultaneously, the file transfer may fail.
To Next Page
Loading...
