Disassembly and Assembly
110
Back Cover Assembly
Leaving screws inside the device may damage internal components, such as the
battery. When assembling, be extra careful not to leave any unassembled screws
inside the device.
Before attaching the back cover, make absolutely sure that there are no screws,
miscellaneous parts, or other foreign objects on the inside of the device (among
the battery, PBA, etc.).
1 Remove the release film of the new back cover adhesive tape.
2 Align the adhesive tape on the rear of device and attach it.
Gently press around the edges to ensure a secure fit.
To Next Page
Loading...
