Disassembly and Assembly
71
14
Remove all adhesive tapes and these tapes are located around the edges of the back
cover (
).
•
Be careful not to put your fingertips or any foreign objects on the rear camera or
back cover lens (
).
•
Make sure to remove any residual tape ( ) attached to the inside of the back
cover before reassembling the device.
•
Be careful not to damage the near components.
Apply additional heat with a microwaveable heating bag if you are having trouble
separating the adhesive.
After you finish disassembling, refer to Back Cover Assembly for how to
reassemble.
To Next Page
Loading...
