Disassembly and Assembly
78
4 Check the screws at the 3 different points on the charging port and remove them
using a cross-head screwdriver.
Be careful not to damage the near components.
Check the number of screws that have been removed, and store them carefully to
make sure that no unassembled screws are left inside the device during assembly.
5 Using the tweezers or disassembly stick, lift up on the separator groove to the upper
right of the charging port module, and remove it carefully.
Be careful not to damage the near components.
After you finish disassembling, refer to Charging Port Assembly for how to
reassemble.
To Next Page
Loading...
