Disassembly and Assembly
88
3 Remove the lower 5G mmWave antenna module.
When removing the 5G mmWave antenna module, be careful not to damage it.
4 Separate the left 5G mmWave antenna and connector from the metal bracket.
•
If the 5G mmWave antenna feels stuck, apply a microwaveable heating bag for
2 minutes to soften the adhesive. When reheating, it should be heated no longer
than 30 seconds.
•
While separating the 5G mmWave antenna module, the metal bracket may be
bent or damaged. You may need to replace the metal bracket with a new one
during reassembly.
Antenna
Connector
Metal bracket
To Next Page
Loading...
