Disassembly and Assembly
96
7 Remove the thin adhesive liner on the outside of the metal bracket and insert the 5G
mmWave antenna module in the lower left slot using the tweezers or your fingers.
Press down lightly with your fingers so that the antenna module is fully fitted.
Be careful not to damage the battery.
When assembling the 5G mmWave antenna module, be careful not to bend it.
8 Insert and fasten the screw 3487 (2 ea) at the lower side 5G mmWave antenna
module.
Be careful not to damage the battery when fastening the screws.
To Next Page
Loading...
