SendingphotosusingWioFiDirect
When the camera connects via a WLAN to a device that supports the Wi Fi Direct function, you can send photos to the device. This feature
may not be supported on some devices.
On the device, turn on the Wi-Fi Direct option.
_ii_ On the camera, in Playback mode, scroll to a photo.
{_ Press [MENU], and then select ShareO/Vi-Fi)
Wi-Fi Direct.
• When in the single image view, you can send only one photo
at a time.
• When in the thumbnails view, you can select multiple photos
by scrolling to thumbnails, and then pressing [OK].
Select OK when you are finished selecting photos.
_:S Select the device from the camera's list of AP devices.
• Ensure that the device's Wi-Fi Direct option is turned on.
• You can also select your camera from the device's listof
AP devices.
::i On the device, allow the camera to connect to the
_J
device.
• The photo will be sent to the device.
Ifyou can_el the connection atternpt before t i8 complete, the camera
may not be able to reconnect to the device. Inthis case, update your
device with the latest firmware,
Wireless network (DV3OOF/DV3OSF only) 125
To Next Page
Loading...
