Samsung SmartThings GP-U999SJVLCAA User Manual

Welcome to your
Water Leak Sensor
Setup
1. 3.
2.
Use the SmartThings mobile app to
select the “Add device” card and
then select the “Water leak sensor”
category.
Make sure the Water Leak Sensor
is within 15 feet (4.5 meters) of your
SmartThings Hub SmartThings Wifi
(or compatible device with
SmartThings Hub functionality)
during setup.
Remove the tab on the Water Leak
Sensor marked “Remove When
Connecting” and follow the
on-screen instructions in the
SmartThings app to complete setup.

Samsung SmartThings GP-U999SJVLCAA Specifications

General

Brand	Samsung
Model	SmartThings GP-U999SJVLCAA
Category	Accessories
Language	English

Summary

Setting Up Your Water Leak Sensor

Hub Proximity Requirements

Ensure the sensor is within 15 feet (4.5 meters) of your SmartThings Hub or compatible device during setup.

Initiating Device Setup

Use the SmartThings mobile app to select 'Add device' and choose the 'Water leak sensor' category.

Finalizing Sensor Connection

Remove the 'Remove When Connecting' tab and follow the on-screen app instructions to complete the setup process.

Water Leak Sensor Placement and Function

Optimal Placement and Detection

Place the sensor in areas prone to water. It detects moisture via top and bottom metal leads and can monitor temperature.

Troubleshooting Connection Issues

Resetting the Sensor

Hold the 'Connect' button for 5 seconds until the LED blinks red to initiate a reset or pairing mode.

Component Identification

Identify the 'Connect button' and 'LED Light' on the back and front of the sensor for troubleshooting.

Further Assistance

Visit Support.SmartThings.com for additional help if you encounter persistent connection problems.