132
• Advanced settings
: (touch ) allows you to configure some of
the IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class.
–
Static IP
: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.
–
Local phone IP
: enter the IP address obtained from the network
operator, if you checked the Static IP option.
–
Static DNS
: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
–
Server 1/Server 2
: enter the Domain Name Server (DNS) addresses.
–
Traffic class
: select the traffic class.
3. Touch
Save
to save these settings.
The WAP settings may vary depending on the service provider.
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection. Unlike infrared, you
do not need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you
can exchange information between them, even if they are located
in different rooms. The following Bluetooth options are available:
Activation
1. From Idle mode, touch ➔
Bluetooth
.
– or –
Touch ➔
Settings
➔
Connectivity
➔
Bluetooth
.
2. Touch the Phone icon to activate Bluetooth.
– or –
Touch to deactivate Bluetooth.
Device Name
1. Touch ➔
Bluetooth
➔
My info
.
2. Touch the
Name
field, touch and hold to erase the
current name.
Menu
Bluetooth Inactive Bluetooth Active
Menu
a817 Blink.book Page 132 Monday, October 4, 2010 10:03 AM
To Next Page
Loading...
