Getting Started 5
Section 1: Getting Started
This section explains how to start using your phone by first
configuring your hardware, activating your service, and then
setting up your voice mail.
Setting Up Your Phone
Prior to use, it is necessary to install both the battery and SIM
into their corresponding internal compartments. The microSD
card slot is also located in this same internal area.
Removing the Battery Cover
1. Remove the battery cover by placing your thumbnail into
the slot at the bottom of the phone (1). If you have fragile
nails, use a pointed object.
2. Lift the cover up and off the phone (2).
Installing the SIM Card
Make sure the gold contacts of the card face into the phone, and
that the angled corner of the card is positioned as shown, as you
slide the SIM card into the socket.
Important!:
The plug-in SIM card information and its contacts can be easily
damaged by scratching or bending, so be careful when handling,
inserting, or removing the card. Keep all SIM cards out of reach
of small children.
Note:
If the card is not inserted correctly, the phone does not detect the SIM
card. Re-orient the card back into the slot if the SIM is not detected.
a817 Blink.book Page 5 Monday, October 4, 2010 10:03 AM
To Next Page
Loading...
