To Next PageTo Next Page
Need help?Do you have a question about the Samsung SP434JMFX/SAP and is the answer not in the manual?
Safety precautions for servicing to prevent hazards like shock and X-rays.
Precautions to follow during the servicing process for safe operation.
Guidelines to prevent damage to sensitive electronic components from static electricity.
List of integrated circuits used in the receiver, their specifications, and remarks.
Step-by-step guide for replacing the cabinet on specific models.
Procedure for replacing the cabinet on different model series.
Instructions for removing and replacing the Cathode Ray Tube assembly.
Procedure for adjusting the Flyback Transformer B+ voltage for proper operation.
Steps for adjusting the lens focus and static focus for clear picture quality.
Detailed guide for adjusting screen convergence using the remote control.
How to enter and navigate the service mode for various adjustments.
Parameters and procedures for Picture-in-Picture adjustments.
Specific adjustments related to the TDA9170 IC for picture enhancement.
Configuration options available in the service menu, including OSD language.
Diagnostic flowchart and component checks for units that do not power on.
Troubleshooting steps for issues where the screen displays no picture.
Troubleshooting procedures for audio problems and no sound output.
Steps to diagnose and correct misaligned convergence on the display.
Exploded diagram and parts list for the SP434JMFX model.
Exploded diagram and parts list for the SP524JMFX model.
List of electrical parts, highlighting differences between models.
Detailed parts list for the SP434JMFX/SAP model.
Layout diagram of the main PCB, showing component placement and references.
Layout diagram of the power supply PCB with component identification.
Layout diagram for the deflection board, indicating component positions.
Layout diagram of the CRT board, showing component arrangement.
Layout diagram of the audio PCB with component placement.
Layout diagram for the Picture-in-Picture (PIP) module.
Layout diagram of the front A/V input section PCB.
Layout diagram for the A/V control interface PCB.
Layout diagram of the SECAM module PCB.
Layout diagram of the Picture-in-Picture (PIP) control PCB.
First part of the main schematic diagram illustrating circuit details.
Second part of the main schematic diagram showing circuit connections.
Third section of the main schematic diagram detailing circuit components.
Fourth part of the main schematic diagram covering tuner and PIP circuits.
Schematic diagram for the deflection circuitry, including convergence.
Schematic diagram for the Picture-in-Picture (PIP) processing module.
Schematic diagram for the main PIP processing section.
Schematic diagram for the audio processing circuits and amplifier.
Schematic diagram illustrating the power supply and standby circuits.
Schematic diagram for the CRT drive and front A/V input circuitry.
Schematic diagram for the SECAM module and its control functions.
Schematic diagram for the convergence and miscellaneous modules.
Schematic diagram for Dynamic Focus, Vertical, and Miscellaneous circuits.
General
