Why is my Samsung DCB-B260Z Receiver remote not working?
If your Samsung Receiver remote isn't working, point it directly towards the Receiver. Replace the batteries, or check that they are inserted correctly.
What to do if there is no sound on my Samsung Receiver?
If you're not getting any sound from your Samsung Receiver, first, ensure the audio cords are correctly connected. Also, check the volume level on your television to make sure it isn't set to zero. Finally, verify that muting is not active by pressing the MUTE key.
Why is my Samsung DCB-B260Z Receiver not getting a signal?
If your Samsung Receiver isn't getting a signal, check that the antenna cable is securely connected. Also, ensure the signal cable is positioned correctly. You can also check the signal strength in the “Installation” menu.
How to turn on Samsung DCB-B260Z Receiver if it's in standby mode?
If your Samsung Receiver is in standby mode, set the receiver to “On”. Also, check the SCART connection to the video output of your television and correct if necessary. Finally, check that you have selected the correct channel and video output on your television, referring to your TV instruction manual if needed.
Why does my Samsung Receiver say 'No access to this channel'?
If your Samsung Receiver displays 'No access to this channel', first, verify that you subscribe to the channel. If the receiver has been off for a while, turn it on, select any channel, and wait up to 60 minutes for authorization.
What to do if Samsung DCB-B260Z Receiver says smartcard error?
If your Samsung Receiver shows a smartcard error, check the Smartcard. Ensure that the Smartcard is inserted correctly.
To Next Page
General
