To Next PageTo Next Page
Need help?Do you have a question about the Samsung DSB-9500AV and is the answer not in the manual?
AC 100-240V ~, 50/60Hz power requirements for the STB.
Do not overload wall outlets, extension cords, or adapters to prevent fire or electrical shock.
Keep liquids away from the STB and use a damp cloth for cleaning, disconnecting power first.
Ensure free airflow by not blocking ventilation holes and avoiding direct sunlight or heat sources.
Use only manufacturer-recommended attachments to avoid hazards or equipment damage.
Disconnect mains power before connecting/disconnecting the LNB cable due to voltage in the center core.
Do not attempt self-service; refer all servicing to a qualified agent to maintain warranty validity.
Essential protection devices are needed for areas with intense lightning activity to safeguard the STB.
The LNB cable ground must connect directly to the system ground for the satellite dish, complying with local regulations.
Dispose of used batteries at designated places for environmental protection.
Features include 4000 channels, software download, EPG, OSD, DiSEqC 1.2, and remote control unit.
Details tuner specs: 950-2150 MHz, IF output, DiSEqC 1.2, and 13V/18V switching.
Covers DVB-S, MPEG-2 video, symbol rate, aspect ratio, and modulator output.
Includes MPEG 1 audio, various audio modes, sampling frequencies, volume control, and digital audio output.
Instructions for inserting Viaccess smartcards, including correct chip orientation.
Guide for inserting CI CAMs and smartcards, including chip orientation and removal.
Details rear panel ports: AC Mains, LNB, LOOP, RS232, S-VHS, SPDIF, AV SCARTs, O/12V, ANT.IN, and TV.
Explains selecting soundtracks, videotracks, and navigating the service list for program selection.
Details accessing EPG and selecting subtitle languages for broadcasts.
Guides accessing main menu and installation, including PIN code requirements.
Compares User/Installer modes and describes antenna positioning and storage.
Instructions for automatic and manual channel scanning.
Covers organising, deleting satellites, and removing transponders.
Steps for moving channels within lists and editing their names.
Explains changing PIN code and recovery if forgotten.
Configuration for media display, modem settings, and time/timer functions.
Details CI CAM usage and embedded Viaccess features (parental rating, authorization).
Solutions for common issues: power, connectivity, signal problems.
Specs for video decoding, audio formats, and signal reception.
Details tuner range, demodulator, FEC, serial interface, and CI module compatibility.
General
