To Next PageTo Next PageWhat to do if the Samsung Receiver remote control does not operate directly?
If the remote control for your Samsung Receiver isn't working, make sure you're pointing it directly at the receiver. Also, check the batteries. They might be dead or not inserted correctly. Replace them or re-insert them properly, ensuring correct polarity.
Why is there no sound on my Samsung DCB-B270R Receiver?
If you're not getting any sound from your Samsung Receiver, first, check the SCART connection to make sure it's properly connected. Also, verify that the loudness level isn't set to 0 and that muting isn't active. Increase the volume on your television and press the MUTE key to disable muting.
What to do if there are no pictures on the screen with my Samsung DCB-B270R Receiver?
If you're not seeing any pictures on the screen when using your Samsung Receiver, ensure that the receiver is set to “On” and not in Standby mode. Verify that the SCART connection is tightly connected to the video output of your television. Also, check that you have selected the correct channel or video output on your television.
Why is there no display LED on the front panel of my Samsung DCB-B270R and no power supply?
If there is no display LED on the front panel and no power supply, the power cord may not be plugged in correctly. Ensure the power cord is properly plugged in.
Instructions for inserting smartcards for scrambled content access.
Describes the operation of each button on the remote control.
Manual scan, channel list editing, favorites, and parental controls.
Reserving programs with timers and setting guard-band time.
Adjusting aspect ratio, TV settings, and automatic subtitles.
Addresses issues like no display, no sound, and remote control problems.
General
