46 Section 2B: Controlling Your Phone’s Settings
Alert Notification
Your phone can alert you with an audible tone when you
change service areas, once a minute during a voice call,
when the signal fades, when powering your phone on or off,
or when a call has been connected.
To enable or disable alert sounds:
1. Select MENU > Settings > Sounds > Alerts.
2. Select Minute Beep, Service, Connect, Sig. Fade
Tone, or Power On/Off and press .
3. Select On or Off and press .
Silence All
There may be times when you need to silence your phone
entirely. The phone’s Silence All option allows you to mute
all sounds without turning your phone off.
To activate Silence All:
䊳 With the phone open, press and hold the volume
key down in standby mode. (The screen will display
“Silence All.”)
To deactivate Silence All:
䊳 Press the volume key up repeatedly to select a desired
volume level.
Note:
If Power On/Off is selected, choose On or Off and press OK.
MENU
OK
MENU
OK
To Next Page
Loading...
