Samsung SPH-A900 - Page 26

SAMSUNG Proprietary-Contents may change without notice
Test Procedure
6-6
This Document can not be used without Samsung's authorization
D.
To finish the Test Mode, You should enter the command "0 0 2".
E.
EntertoTestMode[47*869#1235]
F.
"0 0 1" : Suspend.
G.
"0 1 1" : Carrier_On.
H.
"014":CDATA.
I.
"0 1 0" : PA_R1(0:LOW GAIN MODE, 1:HIGH GAIN MODE)
J.
"0 1 9" : Adjust RF power level.
PCS
A.
EntertoTestMode[47*869#1235]
B.
"0 0 1" : Suspend.
C.
The command "022" is mode and channel change
"30600"
Channel number
Mode:PCS
Push the [enter] key to save.
D.
To finish the Test Mode, You should enter the command "0 0 2".
E.
EntertoTestMode[47*869#1235]
F.
"0 0 1" : Suspend.
G.
"0 1 1" : Carrier_On.
H.
"014":CDATA.
I.
"0 1 0" : PA_R1(0:LOW GAIN MODE, 1:HIGH GAIN MODE)
J.
"0 1 9" : Adjust RF power level.