This PDP has a built:in clock that will appear on screen when you press the Clock Display button On the
remote control.
Press the Menu button. Move thejoystick up or
down to select '!TIME", then pres s the joystick to
enter.
Move theaoystick !eft or right to select hour, then
move theaoystick up or down to select the correct
hour.
Move thejoystick left or right tO select minute, then
move thejoystick up Or down to select the correct
minute.
Move the joystick left 0r right to select !'AM"; then
move the joystick up or down to select "AM" or
"PM".
If you want to display the Clock on screen, move
thejoystick down to select "Clock Display"; then
move thejoystick right,
l:_ Press!he Menu button to exit.
J
theSlee
You can set your PDP to automatically turn off after a preset interval.
Press the Menu button. Move the joystick up or
down to select "TIME". then press thejoystick to
en[er.
2
Move the joystick up or down to select "Sleep
Timer",
Move the joystick left or right to select the time inter-
val for the PDP to stay on. The interval ranges from
10 to 360 minutes.
3ress the Menu button to exit.
40 41
To Next Page
Loading...
