11
REPLACING THE INTERIOR LIGHT
First plug out from the outlet.
Freezing room indoor lamp
• Remove the indoor lamp cover by using driver
and pull out the lamp and fit the front part of
indoor lamp cover into the groove and then fit the
rear part.
Refrigerating room indoor lamp
1. Unscrew the fixed bolt and separate the lamp by fitting
the driver into two rear holes of indoor lamp cober
and pressing it.
2. Turn the indoor lamp to pull it out and replace it with a
new one.
3. After fitting the front part of indoor lamp cover, fit the
rear sill area and then fix it with screw.
❊ In case of having difficulties in replacing and
purchasing parts, contact the nearest Samsung
Electronic service center.
+
+
SR-61.../65/69/74... 2/8/00 2:43 PM Page 11
To Next Page
Loading...
