Samsung SR-S24FTA - Page 51

1.
Since
there
is
the
possibility
of
electric
shock
while
replacing
the
inside
lamp
of
the
Freezer,
the
power
should
be
OFF
to
repair.
2. Be careful of burning because the glow lamp generates heat.
(2PIN) inside the F-Room is
normally inserted?
v. ~
*
Lamp
Case
of
the
up
Per
side
Re-insertion
of
Connector
of the Freezer 2.23 ees
Filament of the lamp
is snapped?
Replacement of the lamp
Catt Rades ‘ F-DOOR $/W contact
is normal?
Y
Check and Repair of F-DOOR S/W
: N
Y connector CN70 is normally
inserted?
:
Repair of F-LAMP RELAY on MAIN
PCB and Replacement of ASS’Y
+ Check scrote
- method in’ Reference N
"© Check method of DOORS
oh Sa
x Information ;
1. Inside lamp of the Freezer is regulated by transferring OPEN/CLOSE signal by F-DOOR
S/W to MICOM and controlling ON/OFF by RELAY regulation at MICOM.
2. When F-DOOR is in open for 10 minutes, the lamp is automatically OFF to avoid the possible dang ..