Shelf of High humidity special room
• Lift upward the special room cover, and push
the right side(No. ➀) inward to remove, and
remove the left side(No. ➁) toward arrow, then
pull it.
• While removing the special room shelf toward
arrow, lift it upward at the hanging point for
removal.
• Lift slightly the front part of special room shelf,
and insert roller between rails, then push it.
• Insert the left part (No. ➀) of special room as
direction of arrow, and pull the right hanging
part(No. ➁) inward as direction of arrow until
inserting.
Procedure of disassemble
Procedure of assemble
SR-V52/57 (ENG) 11/15/59 4:29 PM Page 15
To Next Page
Loading...
