English
English-1
Features
Samsung’s 3D glasses let you view 3D video and images on your compatble Samsung 3D TV. To
work, the glasses must be connected (paired) to the TV. The glasses connect to devices via the
2.4GHz RF band.
✎
The Samsung 3D glasses cannot connect to a non-Samsung wireless communication
device.
✎
3D glasses can only connect to a Samsung 3D TV (D Series) released after 2011.
Parts
Components
●
3D Active Glasses
●
User guide
●
Cleaning cloth
●
Micro USB Cable
●
Nose pad
✎
To wear the 3D glasses over eyeglasses, detach the nose pad from the 3D
glasses.
✎
Refer to the last chapter in this user guide for details about how to attach or
detach the nose pad.
Performing 3D Active Glasses pairing
✎
What is Pairing? Pairing is a process that prepares devices to exchange data so that, in
operation, the devices can transmit and exchange data instantly.
✎
Ensure your Samsung TV and 3D glasses are no farther than 50 cm (19.5 in) apart
from each another while pairing is in progress.
✎
The working distance depends on obstacles (a person, metal, walls, etc.) or
electromagnetic waves.
✎
Note that if you take off the 3D glasses while viewing 3D video and the 3D mode remains
enabled on your TV, it will take 5 minutes for the 3D glasses to power off.
✎
If the glasses do not operate immediately when you put them on while the TV is in 3D
mode, lightly tap the “sensor pad” on the glasses.
✎
This product is rechargeable. It may not operate due to the dead battery when you
attempt to use it for the first time. In this case, charge the battery.
3D Active Glasses
SSG-3500CR
User’s Guide
Operating range
Recommended
viewing distance
2~6m (6 to 19.5 ft)
Recommended
pairing distance
50cm (19.5 in)
Pairing:
Press the pairing button on the
3D glasses for more than 2 seconds.
Pairing will start.
Turning the glasses on and dff: Put on the
3D glasses. The glasses will automatically
power on and the green LED will be lit for
3 seconds. To power off the glasses, take
off the glasses. Several minutes later, the
glasses will automatically power off and
the red LED will be lit for 3 seconds.
Recommended viewing distance
Recommended pairing distance
2~6m
50cm
Liquid-crystal shutter
pairing button
Nose pad
01.eng.indd 1 2011-03-28 오전 9:23:03
To Next Page
General
