Samsung ST90 - Disconnecting the Camera (for Windows XP)

Playback/Editing 78
Transferring files to your Windows computer
5
Turn on the camera.
• The computer recognizes the camera automatically.
If you set the USB option to Select Mode, select Computer from the
pop-up window.
6
On your computer, select My Computer → Removable
Disk → DCIM → 100PHOTO.
7
Select the files you want and drag or save them to your
computer.
Disconnecting the camera (for Windows XP)
The way to disconnect the USB cable for Windows Vista/7 is
similar.
1
If the status lamp on your camera is blinking, wait until
it stops.
2
Click on the tool bar at the bottom right of your PC
screen.
3
Click the pop-up message.
4
Click the message box indicating safely removed.
5
Remove the USB cable.
The camera may not be removed safely when Intelli-studio is running.
End the program before disconnecting the camera.