Basic functions
27
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
-
there is little contrast between the subject and background
(for example, when your subject is wearing clothing that is similar in color
to the background)
- the light source behind the subject is too bright
- the subject is shiny or reflective
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame
Use the focus lock
Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to take your photo.
• When you take photos in low light
Turn on the flash.
(p. 44)
• When subjects are moving fast
Use the continuous
or motion capture
function. (p. 57)
To Next Page
Loading...
Need help?
General
