Samsung ST93 - Using the DUAL IS Mode; Using the Program Mode

Extended functions 36
Shooting modes
Using the Program mode
In the Program mode, you can set various options except
the shutter speed and aperture value, which the camera sets
automatically.
1
In Shooting mode, press [ ].
2
Select Program.
3
Set options.
(For a list of options, refer to
“Shooting options”.)
4
Align your subject in the frame, and then half-press
[Shutter] to focus.
5
Press [Shutter] to take the photo.
Using the DUAL IS mode
Reduce camera shake and prevent blurred photos with Optical
and Digital Image Stabilization functions.
Before correction After correction
1
In Shooting mode, press [ ].
2
Select DUAL IS.
3
Align your subject in the frame, and then half-press
[Shutter] to focus.
4
Press [Shutter] to take the photo.
• The Digital zoom and Intelli-zoom are not available in mode.
• The camera corrects the photo optically only if the light source is
brighter than fluorescent light.
• If your subject is moving rapidly, the photo may be blurry.
• Set the Optical Image Stabilization option to reduce camera shake in
different shooting modes. (p. 25)