Why is 5.1 channel sound not working on my Samsung DVD VCR Combo?
If your Samsung DVD VCR Combo isn't producing 5.1 channel sound, ensure that the DVD-VCR player is connected to a compatible amplifier and that the disc is recorded with 5.1 channel sound. Also, verify that the disc has the “5.1 ch” mark and that your audio system is properly connected and functioning.
What to do if Samsung DVD VCR Combo disc does not play?
If your Samsung DVD VCR Combo is not playing a disc, make sure the disc is placed with the label side facing up. Check the DVD's region code to ensure compatibility. Note that the player does not support CD-ROMs or DVD-ROMs; use DVDs or CDs instead.
Why no audio from Samsung DVD VCR Combo?
If you're not getting any audio from your Samsung DVD VCR Combo, ensure that you have selected the correct Digital Output in the Audio Options Menu.
How to reset password on Samsung DVD VCR Combo?
If you've forgotten your password for the Samsung DVD VCR Combo, power on the unit from a cold start without any disc inside. Then, press the ?? and ?? buttons simultaneously on the front panel for five seconds. Turn the DVD-VCR off and on again using the STANDBY/ON button. The display will indicate that Parental Mode is now unlocked, allowing you to set a new rating level and password.
What does the icon on my Samsung DVD VCR Combo screen mean?
If you're getting an icon on the screen of your Samsung DVD VCR Combo, it means the current feature or action cannot be completed. This could be due to restrictions in the DVD's software, lack of support for the feature, the feature being temporarily unavailable, or requesting a title, chapter, or search time that is out of range.
Why playback mode differs from Setup Menu selection on Samsung DVD VCR Combo?
If the playback mode on your Samsung DVD VCR Combo differs from what you've selected in the Setup Menu, it's likely that the disc is not encoded with the corresponding function.
Why the screen ratio cannot be changed on Samsung DVD VCR Combo?
If the screen ratio cannot be changed on your Samsung DVD VCR Combo, it's because the screen ratio is fixed on the DVD you are playing.
Alerts and warnings regarding electrical safety and product handling.
Identification of buttons and indicators on the front of the DVD-VCR unit.
Automated initial setup process for tuning TV stations and setting time.
Procedure to manually set the DVD-VCR's internal clock and calendar.
How to program recordings using VideoPlus+ codes from TV listings.
Basic steps to play back a recorded video cassette.
Customizing the language for DVD menus and on-screen text.
Common problems and solutions for both VCR and DVD functions.
General| Video upscaling | No |
|---|---|
| Progressive scan output | Yes |
| Analog signal format system | NTSC, PAL |
| Audio decoders | Dolby Digital, DTS |
| Video formats supported | - |
| HDMI ports quantity | 0 |
| SCART ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video outputs quantity | 1 |
| Playback disc types | CD, DVD |
| Recording disc types | Not supported |
| Optical disc diameter | 80, 120 mm |
| Playback disc formats | CD audio |
| Number of optical discs | 1 discs |
| Device type | DVD player |
| Product color | Silver |
| Disc loading type | Tray |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 19 W |
To Next Page
