Adjusting Your Monitor
24
1. Push the Menu ( ) button.
2. Push the - button or + button until the Menu Display Time
screen is displayed.
3. Push the Menu ( ) button to open the Menu Display Time
adjustment screen.
4. Use the - or + buttons to select 5, 10, 20, 50, 200 seconds.
20 seconds is the default value.
The menu will automatically turn off if no adjustments are
made for a certain time period.
You can set the amount of time the menu will wait before
it turns off.
Menu Display Time
1. Push the Menu ( ) button.
2. Push the - button or + button until the Display Mode
screen is displayed.
You can see the frequency, the polarity of the operational
signals and the resolution level.
Display Mode
Note
These screens do not allow any changes to the settings,
they are for information only.
To Next Page
Loading...
