User’s Manual
On-Screen Display
Geometry parameters are replaced with the factory
default values.
1. Push the Menu ( ) button.
2. Push the - button or + button until the Reset screen is
displayed.
3. Push the Menu ( ) button twice to open the
Geometry Reset adjustment screen.
4. Push the + button to select Yes.
If you don't want to reset the monitor,
use the - button to
select No.
Color parameters are replaced with the factory default
values.
1. Push the Menu ( ) button.
2. Push the - button or + button until the Reset screen is
displayed.
3. Push the Menu ( ) button again and then press
the - or + button until the Color Reset screen appears.
Push the Menu ( ) button to open the Color Reset
adjustment screen.
4. Push the + button to select Yes.
If you don't want to reset the monitor, use the - button to
select No.
Menu
How to adjust
Reset
To Next Page
Loading...
