RGB IN (Source List : Analog) :
Connect the signal cable to the 15-pin,
RGB IN port on the back of your monitor.
VIDEO (Source List : Video)
: External device (video) input terminal
S-VIDEO (Source List : S-Video)
: External device (S-video) input terminal
Kensington Lock
: The Kensington lock is a device used to physically fix the
system when using it in a public place.
(The locking device has to be purchased separately.)
For using a locking device, contact where you purchase it.
Stand Height Adjustment
1. Press the top side of the stand and then push the button at
the rear bottom of the stand.
2. You can adjust the stand height using this button.
When you are using a stand height as maximum ,
it will go down a little bit from spring elasticity.
See Connecting the Monitor for further information regarding cable connections.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
