1. Use this button for open the on-screen menu and exits from the menu screen or closes screen
adjustment menu.
2.This button allows you to adjust items in the menu. /
Analog/Digital(DVI) : MagicBright™
MagicBright™ is a new feature providing the optimum viewing environment depending on the
contents of the image you are watching.
Then push button again to circle through available preconfigured modes.
( Custom → Entertain → Internet → Text )
Digital(DVD)/Video/S-Video : Mode
The Monitor has four automatic picture settings that are preset at the factory. Then push button
again to circle through available preconfigured modes.
( Dynamic → Standard → Movie → Custom )
3.This button allows you to adjust items in the menu. /
When OSD is not on the screen, push the button to adjust brightness.
4. Press this button to activate a highlighted menu item. /
Selects the video signal while the OSD is off.
5. Press to self-adjust to the incoming Analog signal.
The values of fine,coarse and position are adjusted automatically.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
