Note
If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom
mode.
Red
MENU →
→ ENTER → [Picture] → → → → ENTER → [Color Control] → ENTER →
[Red] →
, → ENTER
Green
MENU →
→ ENTER → [Picture] → → → → ENTER → [Color Control] → → ENTER
→ [Green] → , → ENTER
Blue
MENU →
→ ENTER → [Picture] → → → → ENTER → [Color Control] → → →
ENTER → f [Blue] →
, → ENTER
Color Temp
MENU → → ENTER → [Picture] → → → → ENTER → [Color Temp] → , → ENTER
Color Temp is a measure of the 'warmth' of the image colors.
Note
This function is only enabled if the Color Tone is set to Off.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images
with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the
Coarse adjustment and then use Fine again.
(Available in PC mode only)
MENU →
→ ENTER → [Picture] → → → → → ENTER → [Image Lock]
Coarse
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → ENTER
→ [Coarse] → , → ENTER
Adjusting the LCD Display
To Next Page
Loading...
