Note
This function does not operate when Dynamic Contrast is set to On in PC, DVI, AV, HDMI, TV
modes.
Multi Control
Available Modes
•
PC / BNC / DVI
•
AV
•
HDMI
•
Component
Multi Control
Assigns an individual ID to the SET.
MENU →
→ → → → ENTER → [Multi Control ] → ENTER → , → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds
to the transmitter setting becomes activated.
Adjusting the LCD Display
To Next Page
Loading...
