Samsung SyncMaster 400DX-2 - Connecting Using a DVI Cable; Connecting Using a HDMI Cable

2. Select BNC
for
the Camcorder connection using the Source button on the front of the
LCD Display or on the remote control.
Note
Applicable to the DX-2 model only.
Connecting Using a DVI Cable
1. Connect between
the DVI OUT port on the LCD Display and the input port on another
monitor using a DVI cable.
2. Connect between the AUDIO OUT port on the LCD Display and the audio input port on
another monitor using a stereo cable.
3. Select DVI using the SOURCE button on the front of the LCD Display or on the remote
control.
Note
DVI OUT does not support HDCP.
Connecting Using a HDMI Cable
1. Connect input
devices such as a Blu-Ray/DVD player to the HDMI IN terminal of the LCD
Display using an HDMI cable.
Connections