Samsung SyncMaster 400DX-2 - Page 74

1. Off
2. On
Picture [ AV / HDMI / Component Mode]
Available Modes
•
PC / DVI / BNC
•
AV
•
Component
•
HDMI
•
MagicInfo
Note
• The BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
Mode
MENU → → ENTER → → ENTER →
→ , → ENTER
The LCD
Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and
"Custom") that are preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
(Not available when Dynamic Contrast is set to On.)
1. Dynamic
2. Standard
3. Movie
4. Custom
Custom
By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
MENU → → ENTER → → → ENTER →
Adjusting the LCD Display