Samsung SyncMaster 460UTn2-UD2

Questions and Answers

C
cynthiawattsAug 12, 2025
How to fix a Samsung Monitor display not showing on the system information chart?
- S
  Sherry BryantAug 12, 2025
  If the display you want to control is not appearing on the system information chart of your Samsung Monitor, follow these steps: 1. Check the RS232C cable connection to ensure it's properly connected to the correct serial port. 2. Verify that no other display with a duplicate ID is connected, as this can cause data collision. 3. Confirm that the display ID is within the range of 0 to 99. You can change the ID using the Display menu.
V
Vanessa RobertsAug 19, 2025
What to do if Samsung Monitor display doesn't appear on Control Info Grids?
- I
  Ian HughesAug 19, 2025
  If the display you want to control does not appear on the other Control Info Grids of your Samsung Monitor, make sure that the display is powered on, checking the power status in the system information chart. Also, ensure that you have selected the correct input source to which the display is connected.
J
Juan MosesAug 27, 2025
What to do if the Samsung SyncMaster 460UTn2-UD2 Monitor remote control does not work?
- A
  Alan FriedmanAug 27, 2025
  If the remote control for your Samsung Monitor isn't working, try running the program again and ensure that 'Remote Control' is set to 'Enable'.
S
stevenhaleSep 3, 2025
Why do Samsung Monitor displays power on/off at different times?
- S
  Steven BrooksSep 3, 2025
  If displays power on or off at different times, even when the On Time or Off Time is set, adjust the time on your PC. This will synchronize the time between the connected Samsung Monitor displays.

Samsung SyncMaster 460UTn2-UD2 Specifications

General

Screen Size	46 inches
Resolution	1366 x 768
Aspect Ratio	16:9
Response Time	8 ms
Viewing Angle	178°/178°
Brightness	700 cd/m²
Contrast Ratio	3000:1
Connectivity	HDMI, DVI-D, VGA, Component, Composite, RS232C