Note
Enabled only when the PIP input is selected in AV, HDMI or Component mode.
5. Tint
Adds a natural tone to the PIP window.
Note
Enabled only when the PIP input is selected in AV, HDMI or Component mode. Oper-
ates only if the video signal is NTSC.
Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to
create an optimum contrast.
1. Off
2. On
(Disabled when PIP is set to On.)
Lamp Control
Adjusts the inverter lamp in order to reduce energy consumption.
Note
This function does not operate when Dynamic Contrast is set to On in PC, DVI, AV,
HDMI or Component modes.
Brightness Sensor
Brightness Sensor automatically detects distribution of the inputted visual signal and adjusts
to create optimum brightness.
1. Off
Adjusting the LCD Display
To Next Page
Loading...
