10
Adjusting Your Monitor
Information
The Information on this screen shows available
horizontal and vertical frequencies and display
resolution.
1
With the menu off, push the button
once to see information about your monitor.
The current Horizontal/Vertical frequencies
received from the computer or video board is
displayed along the bottom.
2
Push the button once more to see the
user defined timing mode.
3
Scroll down with the button to display the
factory preset timings.
Note: These screens do not allow any changes to
the settings; they are for information only.
Brightness/Contrast
This feature will adjust the monitor’s brightness/
contrast. Once you have adjusted one of these
features, push the
MENU
( )button once to
close the brightness/contrast screen.
1
With the menu off, push the
,
,
or
button. The brightness/contrast display
will appear.
2
Push the button to increase the
brightness or the button to decrease the
brightness; push the button to increase
the contrast or the button to decrease
the contrast.
Information
Frequency Range:
H: 30-110kHz
V: 50-160Hz
Recommended Timing:
1280x1024 / 85Hz
Serial Number:
i
i
50
50
Brightness/Contrast
900SLe1.book Page 10 Tuesday, January 11, 2000 10:03 AM
To Next Page
Loading...
