to a Computer
1.
Connect the power cord for your monitor to the POWER on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2-1.
Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the
RGB
port on the back of your monitor.
2-2.
Using the DVI (Digital) connector on the video card.
Connect the DVI cable to the
DVI(HDCP)
port on the back of your monitor.
3.
Connect the
(DVI/PC IN) AUDIO
port on the rear side of the monitor to the sound card of the PC.
4.
Turn on both your computer and the monitor.
2. Connecting to a Macintosh
To Next Page
Loading...
