→ , → ENTER
Color Temp.
MENU → → ENTER → → → → → ENTER →
→ , → ENTER
Color Temp is a measure of the 'warmth' of the image colors.
(Not available when Dynamic Contrast mode is set to On.)
Note
This function is only enabled if the Color Tone is set to Off.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
(Available in PC mode only)
(Not available when Dynamic Contrast mode is set to On.)
MENU →
→ ENTER → → → → → → ENTER →
Coarse
MENU → → ENTER → → → → → → ENTER → → ENTER
→
→ , → ENTER
Removes noise such as vertical stripes. Coarse adjustment may move the screen image
area. You may relocate it to the center using the horizontal control menu.
Fine
MENU →
→ ENTER → → → → → → ENTER → → →
ENTER →
→ , → ENTER
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
Adjusting the LCD Display
To Next Page
Loading...
