Lamp Control
MENU → → → → ENTER → → → → → → → → → → → → →
→ ENTER →
→ , → ENTER
Adjusts the inverter lamp in order to reduce energy consumption.
Note
Not available when Dynamic Contrast mode is set to On.
Multi Control
Available Modes
•
PC
•
HDMI
•
MagicInfo
Multi Control
Assigns an individual ID to the SET.
MENU → → → → → ENTER → → ENTER
→ , → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
MagicInfo
Available Modes
•
PC
•
HDMI
Adjusting the LCD Display
To Next Page
Loading...
