Using the product 3-46
INFORMATION
Off Timer Setting
Turns the power off automatically when the configured time is reached.
When <On> of <Off Timer On/Off> is selected,This function is available only.
Key Repeat Time
Controls the repeat delay of a button.
You can set to <Acceleration>, <1 sec> or <2 sec>. If <No Repeat> is selected, the button only
responds once.
Customized Key
You can set the function of the Customized Key to one of the following.
• PC signals : <MagicBright> - <MagicAngle> - <MagicEco> - <Image Size>
•
AV signals : <Picture Mode> - <MagicAngle> - <MagicEco> - <Image Size>
Auto Source
•
<Auto> - The monitor automatically selects an input signal.
• <Manual> - Users have to manually select an input signal.
Not applicable to analog (D-SUB)-or-digital (DVI)-dedicated models.
PC/AV Mode
Set to PC when connected to a PC.
Set to AV when connected to an AV device.
• This function does not support Analog mode.
• Supplied for the wide models only such as 16:9 or 16:10.
Display Time
The OSD automatically disappears if no action is taken by the user.
You can determine the time to wait before the OSD is hidden.
• <5 sec> - <10 sec> - <20 sec> - <200 sec>
Menu Transparency
You can select the transparency of the OSD.
• <Off> - <On>
Menu Description
INFORMATION
Shows the frequency and resolution set on the PC.
For models with an Analog interface only, <Analog/Digital/HDMI> is not shown in the
<Information>.
Menu Description
To Next Page
Loading...
