To view the operating screen displayed when pressing the [ ] button after configuring the
customized key for a function, click the name of each function.
(MagicBright - MagicColor - Color Effect - Image Size)
Note
You can configure the custom-
ized key for a required function
via Setup > Customized Key.
Brightness
When OSD is not on the screen, push the Brightness ( ) button to adjust brightness.
OSD Function
PICTURE Bright-
ness
Contrast Sharpness Magic-
Bright
Coarse Fine Response
Time
COLOR Magic-
Color
Red Green Blue
Color
Tone
Color Effect Gamma
SIZE&PO-
SITION
H-Posi-
tion
V-Position Image Size Menu H-Po-
sition
Menu V-
Position
SET-
UP&RE-
SET
Reset Menu Trans-
parency
Language LED On/Off
Adjusting the Monitor
SOURCE
Selects the video signal while the OSD is off.
When the / button is pressed to change the input mode, a message appears in the upper left of
the screen displaying the current mode -- analog or digital input signal.
To Next Page
Loading...
